• 1964 Retro Reproduction: Take a trip back in time with this amazing model rocket!
• Amazing 3 Stage Flights: Experience the thrill of multi - stage launches!
• Precision Components: Features a precision turned balsa nose cone and laser cut balsa fins.
Assembly Required Skill Level 3
Payload Bay
Parachute Recovery
Body Diameter 1.637'
Length 25'
Fin Span 7'
Net Weight 2.5oz
Made in the USA
Instructions
Engines Approx. Altitude
C6 - 7, C6 - 0, C6 - 0 2000'
B6 - 6, B6 - 0, B6 - 0 1100'
Model Rocket Kits are rated by Skill Level
1 Beginner
2 Intermediate
3 Advanced
4 Expert
5 Master
If you are just starting in the hobby start at the beginner level and move up from there at your own pace.
What is needed to build and fly
All model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit.
Additional supplies will be necessary to build and finish your model rocket kit and may include:
Scissors, Hobby Knife
Ruler
Wood Glue, Model Cement or CA(Super Glue)
Sandpaper
Masking Tape
Finishing Supplies like:
Wood Filler
Sealer/Primer
Paint
Launching Equipment and Supplies like:
Recovery wadding
Launch Pad
Launch Controller
Power supply
Model Rocket Motors and Igniters
A safe place to fly using guidelines from the National Association of Rocketry Safety Code
The Semroc Farside - X™ Flying Model Rocket Kit is perfect for advanced hobbyists looking to experience the excitement of model rocketry. It's great for outdoor launches on clear days. This 1964 retro reproduction rocket has a body diameter of 1.637 feet, a length of 25 feet, a fin span of 7 feet, and a net weight of 2.5 ounces. You can enjoy amazing 3 - stage flights with this precision - built kit.
